Icprog-AVR2.0 is a new generation USB AVR microcontroller programmer. The ICprog AVR is the smallest USB Programmer for Atmel AVR Microcontoller, available at the market. The version ICprog AVR 2,0 programs with almost double programming speed like conventional programming adapters!

Programmer is AVR910 compatible. Two versions of programmers are available:

6-Pin Version with standard AVR910 6-pin header

10-pin Version with KANDA interface

USB programming software: AVR AVR-Studio of Atmel (AVR Prog) and compatible

pin allocation: 2 different (autodetect)

current supply: over USB quantity

L x B x H (mm3): 38.7 x 23,1 x 14,6

AVR microcontrollers supported:

ATmega:
ATmega48, ATmega88, ATmega168, ATmega8, ATmega16, ATmega32, ATmega64,
ATmega103, ATmega128, AT90CAN128, ATmega1280, ATmega1281, ATmega640,
ATmega161, ATmega162, ATmega163, ATmega169, ATmega164, ATmega324,
ATmega644, ATmega329, ATmega3290, ATmega649, ATmega6490
ATmega8515, ATmega8535
ATtiny:
ATtiny10, ATtiny12, ATiny13, ATtiny15, ATtiny26, ATtiny2313, ATtiny25, ATtiny45,
ATtiny85, ATtiny24, ATtiny44, ATtiny84
Classical:
AT90S1200, AT90S2313, AT90S2323, AT90S2333,
AT90S2343, AT90S4414, AT90S4433, AT90S4434,
AT90S8515, AT90S8534, AT90S8535, AT90S8544

For programming the free AVR studio is recommended by Atmel with the Tool AVRprog contained in it. Alternatively e.g. AVRDUDE can be used (Download on this side). The two LEDS on the Programmer are for control purposes - one shines if the Programmer by USB to the PC is attached and the other one during the programming process.

Blogsphere: TechnoratiFeedsterBloglines
Bookmark: Del.icio.usSpurlFurlSimpyBlinkDigg
RSS feed for comments on this post  |  TrackBack URI for this post

This entry was posted on Tuesday, September 19th, 2006 at 2:12 pm and is filed under AVR Microcontrollers. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.