Recent Comments:
- loman: Hi sir Thank you your great article, i made this JTAG long time ago, but recently, i upgrade the avr studio tp...
- scienceprog: You can use any I/O pins for this. Of course you need to do changes in software definitions.
- Jimmy: Hi, Does the shift register have to be controlled by the adc pins on the atmega or can another port be used?...
- David Infante Sànchez: I built this programmer using atmega 8, and this microcontroller was programmed using my AVR...
- aditya: gmmm i am having some issue gettng the i2c out with the firmware present here.. ( get a blank box withe i2c...
- Manoj Jaiswal: will you put full source code is txt format. i unable to understandhow it differtiate key of remote...
- Stofjas: plz somebody upload the component list … greetz
Archives
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- December 2007
- November 2007
- October 2007
- September 2007
- August 2007
- July 2007
- June 2007
- May 2007
- April 2007
- March 2007
- February 2007
- January 2007
- December 2006
- November 2006
- October 2006
- September 2006
- August 2006
- July 2006
- June 2006
- May 2006
- April 2006
- March 2006
Googlebot visited this page Friday, May 9, 2008
