Comments on: Microcontroller Brown-out detection http://www.scienceprog.com/microcontroller-brown-out-detection/ ScienceProg serves scientific, embedded, biomedical engineering, physics based contents. If you want your article or scientific project to be on this site, do not hesitate to contact. Tue, 07 Feb 2012 20:33:17 +0200 hourly 1 http://wordpress.org/?v=3.3.1 By: David http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-1657 David Sat, 10 Dec 2011 17:38:21 +0000 http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-1657 You can either use a Voltage Detector, on a simple TO-92 package can help you reset your microcontroller when voltage goes lower than 4.5V http://www.ti.com/product/tl7757 You can either use a Voltage Detector, on a simple TO-92 package can help you reset your microcontroller when voltage goes lower than 4.5V

http://www.ti.com/product/tl7757

]]> By: tissit http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-397 tissit Fri, 25 Jun 2010 19:37:01 +0000 http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-397 The internal brownout detector is hardware, not software. The internal brownout detector is hardware, not software.

]]> By: Matthew http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-396 Matthew Fri, 11 Jun 2010 04:14:31 +0000 http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-396 Hi, Thanks for the explanation of the brown-out, but would it be better to go with an external brown-out or an internal programmed brown-out? And could a programmed brown-out be corrupted if there are power problems? Thank You Hi,

Thanks for the explanation of the brown-out, but would it be better to go with an external brown-out or an internal programmed brown-out? And could a programmed brown-out be corrupted if there are power problems?

Thank You

]]> By: Omer Farook http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-395 Omer Farook Thu, 24 Dec 2009 17:34:14 +0000 http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-395 hello, can somebody please explain in simple language, what is burnout? thanx hello,
can somebody please explain in simple language, what is burnout?
thanx

]]> By: Amol http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-394 Amol Tue, 24 Mar 2009 07:18:06 +0000 http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-394 Hello, Thank you for brown out detector explanation. Its is very helpful. Please provide an example sample code showing how to use built in Brown-out detection (BOD) circuit of AVR Atmega128 microcontroller. Regards, Amol G Hello,
Thank you for brown out detector explanation. Its is very helpful.
Please provide an example sample code showing how to use built in Brown-out detection (BOD) circuit of AVR Atmega128 microcontroller.
Regards,
Amol G

]]> By: Osama http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-393 Osama Sun, 14 Sep 2008 20:35:42 +0000 http://www.scienceprog.com/microcontroller-brown-out-detection/#comment-393 Thank you for brown out detector explanation. please provide an example sample project showing how to use on-chip brown out detector of AVR microcontrollers Thank you for brown out detector explanation.
please provide an example sample project showing how to use on-chip brown out detector of AVR microcontrollers

]]>