Emergency supply source for your electronic device
Sometimes you are needed to maintain power supply for your device for some time when the main source fails. It can be alarm system or some light source or digital clock. Of course if source interrupts are very short, there can be capacitor with big capacity connected, but it is not reliable. Better use backup battery and diode.
This solution is very simple and cheap. The diode protects the back current float to battery. This doesn’t take much space to implement as the main bigger part is battery. As there just backup source it is not necessary to use rechargeable battery.
Blogsphere: TechnoratiFeedsterBloglines
Bookmark: Del.icio.usSpurlFurlSimpyBlinkDigg
RSS feed for comments on this post | TrackBack URI for this post
New on WinAVR Tutorial
Running TX433 and RX433 RF modules with AVR microcontrollers,Sometimes in embedded design you may want to go wireless. Might be you will want to log various readi …Programming AVR ADC module with WinAVR,Most of AVR microcontrollers have Analog to Digital Converter (ADC) integrated in to chip. Such solut … |
New on WinARM Tutorial
What are differences between WinARM and WinAVR,Everyone who is working with AVR microcontrollers knows this powerful tool – WinAVR (http://win …LPC2000 watchdog timer,As in all microcontrollers watchdog timers purpose isto reset microcontroller after reasonable amount … |
